dmesg - Intel Iris Plus 650
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2035663
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7703436K/8272016K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 568580K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 3500.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7008.00 BogoMIPS (lpj=14016000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 34227 entries in 134 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007a298000 end: 0x0000007a2b7fff
DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7567U CPU @ 3.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (28032.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x68eb0000-0x68eb0fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7a35a000-0x7ab35fff] (8241152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 2:44:31, date: 01/11/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload2-191)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
ACPI Error: Method parse/execution failed [\_SB.PCI0.RP04.PXSX] (Node ffff9ddff60d4b40), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload2-191)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
ACPI Error: Method parse/execution failed [\_SB.PCI0.RP08.PXSX] (Node ffff9ddff60d5d48), AE_NOT_FOUND (20160930/psparse-543)
ACPI: Executed 50 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DDFF4FBF800 0007BC (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DDFF492DC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DDFF4EB96C0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DDFF4EC8800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DDFF4900000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DDFF492D000 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DDFF4935000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
pci 0000:00:02.0: [8086:5927] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdc24f000-0xdc24ffff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdc230000-0xdc23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdc24e000-0xdc24efff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdc24d000-0xdc24dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdc248000-0xdc249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdc24c000-0xdc24c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdc24b000-0xdc24b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:9d17] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdc244000-0xdc247fff]
pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xdc240000-0xdc243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdc220000-0xdc22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdc24a000-0xdc24a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdc200000-0xdc21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01-39]
pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
pci 0000:3a:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:3a:00.0: reg 0x10: [mem 0xdc100000-0xdc101fff 64bit]
pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:3a:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 3a]
pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
pci 0000:3b:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:3b:00.0: reg 0x10: [mem 0xdc000000-0xdc000fff]
pci 0000:3b:00.0: supports D1 D2
pci 0000:3b:00.0: PME# supported from D1 D2 D3hot
pci 0000:3b:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 3b]
pci 0000:00:1c.7: bridge window [mem 0xdc000000-0xdc0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x14, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x68eb0000-0x6bffffff]
e820: reserve RAM buffer [mem 0x79e88000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7afff000-0x7bffffff]
e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: [io 0x0a50-0x0a5f] has been reserved
system 00:00: [io 0x0a60-0x0a6f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs ITE8708 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01-39]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 3a]
pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
pci 0000:00:1c.7: PCI bridge to [bus 3b]
pci 0000:00:1c.7: bridge window [mem 0xdc000000-0xdc0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
pci_bus 0000:3a: resource 1 [mem 0xdc100000-0xdc1fffff]
pci_bus 0000:3b: resource 1 [mem 0xdc000000-0xdc0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 40844K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x62d59000-0x66d59000] (64MB) mapped at [ffff9ddde2d59000-ffff9ddde6d58fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3282142a9b0, max_idle_ns: 440795384778 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1515638671.692:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0x90000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x8E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (-263 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-42-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-42-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x806e9, pf=0x40, revision=0x7c
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 08f7e76e35960ddc5f58d339c2ab190bcc4bf201'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 2:687:712
rtc_cmos 00:03: setting system clock to 2018-01-11 02:44:32 UTC (1515638672)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1156K
Freeing unused kernel memory: 268K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
[drm] Initialized
rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
ahci 0000:00:17.0: version 3.0
rtsx_pci 0000:3b:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 123
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xdc24b000 port 0xdc24b100 irq 124
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-4: new high-speed USB device number 2 using xhci_hcd
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f4:4d:30:6a:e1:e6
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[drm] Found 64MB of eDRAM
e1000e 0000:00:1f.6 eno1: renamed from eth0
[drm] Memory usable by graphics device = 4096M
checking generic (90000000 7f0000) vs hw (90000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-9: ST1000LM014-1EJ164, SM15, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM15 PQ: 0 ANSI: 5
usb 1-4: New USB device found, idVendor=0409, idProduct=005a
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
random: fast init done
usb 1-8: new full-speed USB device number 3 using xhci_hcd
[drm] failed to retrieve link info, disabling eDP
[drm] GuC firmware load skipped
usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-4.2: new full-speed USB device number 4 using xhci_hcd
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
usb 1-4.2: New USB device found, idVendor=046d, idProduct=c52b
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: USB Receiver
usb 1-4.2: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4.2/input2
clocksource: Switched to clocksource tsc
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-4.4: new low-speed USB device number 5 using xhci_hcd
input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input4
logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:14.0-4.2:1
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-4.4: New USB device found, idVendor=0557, idProduct=2213
usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.4: Product: HDMI KVM
usb 1-4.4: Manufacturer: ATEN
[drm] RC6 on
input: Logitech K330 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input5
logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:14.0-4.2:2
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Socket (/dev/log).
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
random: crng init done
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[250]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0004 -> 0006)
ite_cir: Auto-detected model: ITE8708 CIR transceiver
ite_cir: Using model: ITE8708 CIR transceiver
ite_cir: TX-capable: 1
ite_cir: Sample period (ns): 8680
ite_cir: TX carrier frequency (Hz): 38000
ite_cir: TX duty cycle (%): 33
ite_cir: RX low carrier frequency (Hz): 0
ite_cir: RX high carrier frequency (Hz): 0
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: ATEN HDMI KVM as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:0557:2213.0006/input/input7
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002)
Registered IR keymap rc-rc6-mce
input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
Bluetooth: hci0: Device revision is 16
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
iwlwifi 0000:3a:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
hid-generic 0003:0557:2213.0006: input,hidraw3: USB HID v1.00 Keyboard [ATEN HDMI KVM] on usb-0000:00:14.0-4.4/input0
input: ATEN HDMI KVM as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0557:2213.0007/input/input8
hid-generic 0003:0557:2213.0007: input,hidraw4: USB HID v1.00 Mouse [ATEN HDMI KVM] on usb-0000:00:14.0-4.4/input1
rc rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
lirc_dev: IR Remote Control driver registered, major 241
rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
IR LIRC bridge handler initialized
iwlwifi 0000:3a:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
iwlwifi 0000:3a:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
IR RC6 protocol handler initialized
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
ite_cir: driver has been successfully loaded
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone3: failed to read out thermal zone (-5)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
iwlwifi 0000:3a:00.0 wlp58s0: renamed from wlan0
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
Adding 8271868k swap on /dev/sda3. Priority:-1 extents:1 across:8271868k FS
audit: type=1400 audit(1515638681.258:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=693 comm="apparmor_parser"
audit: type=1400 audit(1515638681.258:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser"
audit: type=1400 audit(1515638681.258:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=693 comm="apparmor_parser"
audit: type=1400 audit(1515638681.258:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser"
audit: type=1400 audit(1515638681.262:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1515638681.262:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1515638681.262:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=699 comm="apparmor_parser"
audit: type=1400 audit(1515638681.262:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=698 comm="apparmor_parser"
audit: type=1400 audit(1515638681.262:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=698 comm="apparmor_parser"
audit: type=1400 audit(1515638681.262:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=698 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1421648 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 11684 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=6)
wlp58s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: deauthenticated from 5c:83:8f:79:74:82 (Reason: 252=)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=122)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: deauthenticated from 5c:83:8f:60:43:6d (Reason: 108=)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 108=)
wlp58s0: authenticate with 5c:83:8f:60:43:62
wlp58s0: send auth to 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:62 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:62 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:60:43:62
wlp58s0: deauthenticated from 5c:83:8f:60:43:62 (Reason: 108=)
wlp58s0: authenticate with 5c:83:8f:79:01:5d
wlp58s0: send auth to 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: send auth to 5c:83:8f:79:01:5d (try 2/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: associate with 5c:83:8f:79:01:5d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:01:5d (capab=0x101 status=0 aid=8)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:79:01:5d
wlp58s0: disconnect from AP 5c:83:8f:79:01:5d for new auth to 5c:83:8f:75:2c:0d
wlp58s0: authenticate with 5c:83:8f:75:2c:0d
wlp58s0: send auth to 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:75:2c:0d (capab=0x101 status=0 aid=9)
wlp58s0: associated
wlp58s0: Limiting TX power to 7 dBm as advertised by 5c:83:8f:75:2c:0d
wlp58s0: deauthenticating from 5c:83:8f:75:2c:0d by local choice (Reason: 3=DEAUTH_LEAVING)
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=6)
wlp58s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: deauthenticated from 5c:83:8f:79:74:82 (Reason: 252=)
wlp58s0: authenticate with 5c:83:8f:60:43:62
wlp58s0: send auth to 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:62 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:62 (capab=0x421 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:60:43:62
wlp58s0: disconnect from AP 5c:83:8f:60:43:62 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=123)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=124)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: deauthenticating from 5c:83:8f:60:43:6d by local choice (Reason: 3=DEAUTH_LEAVING)
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:3a:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=6)
wlp58s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=125)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
CPU3: Core temperature above threshold, cpu clock throttled (total events = 20)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 20)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 20)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 20)
mce: [Hardware Error]: Machine check events logged
CPU0: Package temperature above threshold, cpu clock throttled (total events = 20)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 20)
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 685de8884ee
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515640701 SOCKET 0 APIC 2 microcode 7c
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 685de889f90
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515640701 SOCKET 0 APIC 3 microcode 7c
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 685debd9818
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515640701 SOCKET 0 APIC 3 microcode 7c
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 685debda118
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515640701 SOCKET 0 APIC 2 microcode 7c
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=8)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
CPU1: Core temperature above threshold, cpu clock throttled (total events = 43)
CPU3: Core temperature above threshold, cpu clock throttled (total events = 43)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 43)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 43)
mce: [Hardware Error]: Machine check events logged
CPU0: Package temperature above threshold, cpu clock throttled (total events = 43)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 43)
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 79bd8f6e5c4
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641042 SOCKET 0 APIC 3 microcode 7c
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 79bd8f70628
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641042 SOCKET 0 APIC 2 microcode 7c
CPU1: Core temperature/speed normal
CPU3: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 79bd929ed14
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641042 SOCKET 0 APIC 2 microcode 7c
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 79bd929f484
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641042 SOCKET 0 APIC 3 microcode 7c
CPU3: Core temperature above threshold, cpu clock throttled (total events = 70)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 70)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 70)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 70)
mce: [Hardware Error]: Machine check events logged
CPU2: Package temperature above threshold, cpu clock throttled (total events = 70)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 70)
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 8b1e8e551ce
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641383 SOCKET 0 APIC 2 microcode 7c
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 8b1e8e56ca6
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641383 SOCKET 0 APIC 3 microcode 7c
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 8b1e91a7ac2
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641383 SOCKET 0 APIC 3 microcode 7c
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 8b1e91a8190
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641383 SOCKET 0 APIC 2 microcode 7c
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Core temperature above threshold, cpu clock throttled (total events = 96)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 96)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 96)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 96)
mce: [Hardware Error]: Machine check events logged
CPU2: Package temperature above threshold, cpu clock throttled (total events = 96)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 96)
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 9ca039ba9e8
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641726 SOCKET 0 APIC 2 microcode 7c
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC 9ca039bc798
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641726 SOCKET 0 APIC 3 microcode 7c
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 9ca03cf102c
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641726 SOCKET 0 APIC 3 microcode 7c
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088010a82
mce: [Hardware Error]: TSC 9ca03cf1752
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515641726 SOCKET 0 APIC 2 microcode 7c
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Core temperature above threshold, cpu clock throttled (total events = 114)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 114)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 114)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 114)
mce: [Hardware Error]: Machine check events logged
CPU0: Package temperature above threshold, cpu clock throttled (total events = 114)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 114)
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC acfe3a673f4
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515642047 SOCKET 0 APIC 2 microcode 7c
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088000bc3
mce: [Hardware Error]: TSC acfe3a69924
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515642047 SOCKET 0 APIC 3 microcode 7c
CPU3: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 128: 0000000088020a82
mce: [Hardware Error]: TSC acfe3de4d92
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515642047 SOCKET 0 APIC 2 microcode 7c
mce: [Hardware Error]: CPU 3: Machine Check: 0 Bank 128: 0000000088020a82
mce: [Hardware Error]: TSC acfe3de4f0a
mce: [Hardware Error]: PROCESSOR 0:806e9 TIME 1515642047 SOCKET 0 APIC 3 microcode 7c
CPU3: Package temperature above threshold, cpu clock throttled (total events = 135)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 135)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 135)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 135)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
CPU3: Package temperature above threshold, cpu clock throttled (total events = 154)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 154)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 154)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 154)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature above threshold, cpu clock throttled (total events = 179)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 179)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 179)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 179)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:75:2c:0d
wlp58s0: authenticate with 5c:83:8f:75:2c:0d
wlp58s0: send auth to 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:75:2c:0d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 8 dBm as advertised by 5c:83:8f:75:2c:0d
wlp58s0: disconnect from AP 5c:83:8f:75:2c:0d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=8)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:75:2c:0d
wlp58s0: authenticate with 5c:83:8f:75:2c:0d
wlp58s0: send auth to 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:75:2c:0d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:75:2c:0d
wlp58s0: disconnect from AP 5c:83:8f:75:2c:0d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=10)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:75:2c:0d
wlp58s0: authenticate with 5c:83:8f:75:2c:0d
wlp58s0: send auth to 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 1/3)
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 2/3)
wlp58s0: associate with 5c:83:8f:75:2c:0d (try 3/3)
wlp58s0: association with 5c:83:8f:75:2c:0d timed out
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=11)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
perf: interrupt took too long (3165 > 3138), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3973 > 3956), lowering kernel.perf_event_max_sample_rate to 50250
perf: interrupt took too long (5013 > 4966), lowering kernel.perf_event_max_sample_rate to 39750
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=133)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=16)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=132)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=18)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=22)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:74:82 (capab=0x421 status=0 aid=3)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:79:74:82
wlp58s0: disconnect from AP 5c:83:8f:79:74:82 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:60:43:6d (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:79:74:82
wlp58s0: authenticate with 5c:83:8f:79:74:82
wlp58s0: send auth to 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:74:82 (try 1/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 2/3)
wlp58s0: associate with 5c:83:8f:79:74:82 (try 3/3)
wlp58s0: association with 5c:83:8f:79:74:82 timed out
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=8)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=7)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=2)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=4)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:51:cf:d2 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:51:cf:d2 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:51:cf:d2
wlp58s0: disconnect from AP 5c:83:8f:51:cf:d2 for new auth to 5c:83:8f:60:43:6d
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=5)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: disconnect from AP 5c:83:8f:60:43:6d for new auth to 5c:83:8f:51:cf:d2
wlp58s0: authenticate with 5c:83:8f:51:cf:d2
wlp58s0: send auth to 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 1/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 2/3)
wlp58s0: associate with 5c:83:8f:51:cf:d2 (try 3/3)
wlp58s0: association with 5c:83:8f:51:cf:d2 timed out
wlp58s0: authenticate with 5c:83:8f:60:43:6d
wlp58s0: send auth to 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:6d (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:6d (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:6d (capab=0x101 status=0 aid=6)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:60:43:6d
wlp58s0: deauthenticated from 5c:83:8f:60:43:6d (Reason: 2=PREV_AUTH_NOT_VALID)
wlp58s0: authenticate with 5c:83:8f:60:43:62
wlp58s0: send auth to 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: associate with 5c:83:8f:60:43:62 (try 2/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:62 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:60:43:62
wlp58s0: disconnect from AP 5c:83:8f:60:43:62 for new auth to 5c:83:8f:79:01:5d
wlp58s0: authenticate with 5c:83:8f:79:01:5d
wlp58s0: send auth to 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:01:5d (capab=0x101 status=0 aid=20)
wlp58s0: associated
wlp58s0: deauthenticated from 5c:83:8f:79:01:5d (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
wlp58s0: authenticate with 5c:83:8f:79:01:5d
wlp58s0: send auth to 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:01:5d (capab=0x101 status=0 aid=20)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:79:01:5d
wlp58s0: disconnect from AP 5c:83:8f:79:01:5d for new auth to 5c:83:8f:60:43:62
wlp58s0: authenticate with 5c:83:8f:60:43:62
wlp58s0: send auth to 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:62 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:60:43:62
wlp58s0: disconnect from AP 5c:83:8f:60:43:62 for new auth to 5c:83:8f:79:01:5d
wlp58s0: authenticate with 5c:83:8f:79:01:5d
wlp58s0: send auth to 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:01:5d (capab=0x101 status=0 aid=20)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:79:01:5d
wlp58s0: disconnect from AP 5c:83:8f:79:01:5d for new auth to 5c:83:8f:60:43:62
wlp58s0: authenticate with 5c:83:8f:60:43:62
wlp58s0: send auth to 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:62 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:60:43:62
wlp58s0: disconnect from AP 5c:83:8f:60:43:62 for new auth to 5c:83:8f:79:01:5d
wlp58s0: authenticate with 5c:83:8f:79:01:5d
wlp58s0: send auth to 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:01:5d (capab=0x101 status=0 aid=21)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:79:01:5d
wlp58s0: disconnect from AP 5c:83:8f:79:01:5d for new auth to 5c:83:8f:60:43:62
wlp58s0: authenticate with 5c:83:8f:60:43:62
wlp58s0: send auth to 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:62 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:60:43:62
wlp58s0: disconnect from AP 5c:83:8f:60:43:62 for new auth to 5c:83:8f:79:01:5d
wlp58s0: authenticate with 5c:83:8f:79:01:5d
wlp58s0: send auth to 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:79:01:5d (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:79:01:5d (capab=0x101 status=0 aid=21)
wlp58s0: associated
wlp58s0: Limiting TX power to 5 dBm as advertised by 5c:83:8f:79:01:5d
wlp58s0: disconnect from AP 5c:83:8f:79:01:5d for new auth to 5c:83:8f:60:43:62
wlp58s0: authenticate with 5c:83:8f:60:43:62
wlp58s0: send auth to 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with 5c:83:8f:60:43:62 (try 1/3)
wlp58s0: RX AssocResp from 5c:83:8f:60:43:62 (capab=0x421 status=0 aid=1)
wlp58s0: associated
wlp58s0: Limiting TX power to 2 dBm as advertised by 5c:83:8f:60:43:62